6 Solutions to the Error of System_Thread_Exception_Not_Handled

Last Updated: 2021-12-31

개요: The error of System_Thread_Exception_Not_Handled is a common Windows issue that usually happens during boot time. Though it can also occur even if you are in the process of your work. In most cases, this issue creates a lot of inconveniences. In addition to the common cause of malfunctioned drivers, there are other culprits such as system incompatibility and memory conflicts. Whenever then error occurs, the computer shuts down, makes a bleep, and pops up with a blue screen. Based on the system configuration, your computer may restart itself. But the vexing part of the issue is that no matter how many times you try to reboot your PC, you will repeatedly see the BSOD. So, in this article, we will explain to you several effective solutions to it. Besides, if there are any data loss problems relating to this issue, you could always turn to Bitwar 데이터 복구 도와주기 위해.

승리 버전 맥 버전


Solution 1: Reinstall Display Drivers

Display drivers are one of the most common causes of this error. You need to uninstall them and then reinstall the latest version of the display drivers. If you can log in to Windows, skip to step 6. But if you can’t, start with step 1.

1 단계: Boot your computer into safe mode.

노트: In safe mode, the computer will disable the drivers and services that are not necessary to run Windows. To boot the system into safe mode, you should turn on your PC and force it to shut down by pressing the power button. Repeat the aforementioned steps until the system starts in repair mode. (you might need to repeat those steps 4 to 5 times). This is the common way to trigger and push the system to go into repair mode.

2 단계: After entering the safe mode, navigate to 문제 해결 > 고급 옵션 > 명령 프롬프트. A 명령 prompt window will appear. Type in the following command and then press 입력하다.


3 단계: 입력 출구 그런 다음 누르십시오 입력하다. 클릭 계속.

4단계: Reboot your system and keep pressing F8 ( or Shift + F8) before the Windows logo appears.  After that, the AdvancedBootOptions menu will pop up.

5단계: 선택하다 SafeMode with Networking 그런 다음 누르십시오 입력하다. After that, the computer will boot into Safe Mode.

6단계: 누르다 Windows key +NS. In the Run dialog, type in devmgmt.msc 그런 다음 누르십시오 입력하다.

7단계: 에서 기기 관리자 window, double-click on 표시하다 adapters to expand it. Right-click on your display driver, and then choose 기기 제거.

8단계: 클릭 Delete the driver software for this device 그리고 클릭 확인. After rebooting your PC, video drivers will be reinstalled automatically.

Solution 2: Uninstall Recently Installed Third-Party Programs

As seen in several cases, an incompatible software application may trigger the issue of System_Thread_Exception_Not_Handled. If you installed any third-party programs just before the error happened, you could try uninstalling them to 고치다 the issue.

Use the steps below to uninstall any recently installed programs.

1 단계: 누르다 윈도우 + R keys at the same time to launch the 운영 상자.

2 단계: 입력 제어판 그리고 클릭 확인.

3단계: 로 이동 프로그램 및 기능 to see all programs installed on your computer.

4단계: 클릭 설치 날짜 button, which will sort out all installed programs by date.

5단계: Now, right-click on the incompatible programs to uninstall them.

Uninstall Recently Installed Third-Party Programs

Solution 3: Check and Repair Windows System Files

Having corrupt system files is another common culprit you should consider. You can use the CHKDSK tool to solve the issue. To do so, use the following steps:

1 단계: 마우스 오른쪽 버튼으로 클릭메뉴를 시작하다 단추.

2 단계: 선택하다 명령 프롬프트(관리자).

3단계: 에서 명령 프롬프트 window, type in the following command and then press 입력하다:

chkdsk c: /f /r


4 단계: It might take some time for the process to finish. After it’s done, reboot your computer and check whether the error is solved.

Solution 4: Disable Fast Startup

Many users reported that the fast startup feature provided by Windows could lead to the error of System_Thread_Exception_Not_Handled. It’s a feature that greatly reduces the time it takes for the system to boot up. Since disabling the fast startup feature will not affect your computer, you could try using this method to check whether the issue is fixed.

1 단계: 누르다 윈도우 + R key to open the 운영 상자.

2 단계: 입력 제어판 그리고 클릭 확인.

3단계: 클릭 전원 옵션 ~로부터 제어판.

4단계: 클릭 전원 버튼의 기능 선택 그리고 현재 사용할 수 없는 설정 변경.

5단계: Uncheck the box next to the option of 빠른 시작 켜기(권장).

Turn off Fast Startup

Solution 5: Run DISM command

If the error of System_Thread_Exception_Not_Handled is caused by corrupt or missing files, you can the aforementioned SFC commands to fix it. But if the error persists, you can try using the DISM command to solve it. Refer to the following steps to learn how to use it.

1 단계: Right-click on the Start Menu button and then select Command Prompt (Admin).

2 단계: In the Command Prompt window, type in the following commands and press Enter at the end of each line:

Dism /온라인 /정리-이미지 /CheckHealth

Dism /온라인 /정리-이미지 /ScanHealth

Dism /온라인 /Cleanup-Image /RestoreHealth


3 단계: After the process is done, reboot your computer to check whether this solution works.

Solution 6: Reset your PC

Resetting our PC is reckoned as the last resort for this issue but there is no doubt that it’s efficient and able to fix most of the BSOD issues, including the one discussed in this article. Refer to the following instructions to learn how to reset your PC.

1 단계: Press Win + I to open Settings.

2 단계: 로 이동 Update & security > Recovery.

3 단계: 클릭 Get started 아래의 section NS 이 PC 초기화.

Reset The PC

4 단계: Click on either 내 파일 보관 또는 모두 제거, depending on whether you want to prevent your files from being wiped out. However, no matter which way you choose, all of your settings will revert to their defaults, and apps on the PC will be uninstalled.

5단계: 클릭 Just remove my files 또는 Remove files and clean the drive if you select 모두 제거 in the previous step. Cleaning the drive takes longer but will ensure that files will be permanently deleted, making recovery almost impossible.

6단계: 클릭 다음 if a message pops up warning you that you won’t be able to roll back to a prior version of the operating system. Click on 초기화 when you are prompted.

7단계: Your computer will then reboot and take several minutes to reset itself. Click on 계속 when prompted.

Bitwar Data Recovery를 사용하여 손실된 파일을 복구하는 방법

As seen in many cases, the error of System_Thread_Exception_Not_Handledmight corrupts the system files, leading to a data loss issue. But with the help of the right tool, you might be able to recover all the lost files. Although there are a plethora of recovery tools you can find on the Internet, Bitwar Data Recovery is among the best when it comes to recovering lost files resulting from tricky computer issues. Refer to the following steps to learn how it works like magic.

1 단계: 당사 공식 웹사이트를 방문하여 Bitwar Data Recovery를 다운로드한 후 설치하십시오.

2 단계: Open the program and select the disk drive where the missing files were stored and click on 다음.

main interface

3 단계: Select a scan mode in this stage. We would like to suggest that you use 빠른 검사, which is capable of retrieving a healthy number of lost files. If it fails to recover the files you want, you can re-run the software and select 면밀히 살펴보다, 더 효과적입니다.

scan mode

4 단계: 복구하려는 파일 유형을 선택하고 다음.

file types

5단계:시사 the wanted files to check their intactness. Choose those files and then click 다시 덮다 복구를 시작합니다.


중요한: To ensure that all the lost files you want will be recovered in an intact state, you should save those recovered files to other drives except for the one where the lost files were stored.


If you have enough knowledge about the error of System_Thread_Exception_Not_Handled, it is not tricky to solve. In this article, we have explained several effective solutions to this BSOD issue. Besides, if you have lost any data because of this error, you can always turn to Bitwar 데이터 복구 도와주기 위해.

이 게시물이 얼마나 유용했습니까?

별표를 클릭하여 평가하세요!

평균 평점 0 배우1 5. 투표수: 0

지금까지 투표가 없습니다! 이 게시물을 가장 먼저 평가하십시오.

이전 기사

포인터 오류에 의한 참조에 대한 7가지 효과적인 솔루션 Summary: The error of System_Thread_Exception_Not_Handled is a common Windows issue that usually happens during boot time. Though it can also...

다음 기사

Windows 10에서 예기치 않은 저장소 예외 BSOD 오류를 해결하는 방법 Summary: The error of System_Thread_Exception_Not_Handled is a common Windows issue that usually happens during boot time. Though it can also...

Bitwar 데이터 복구 정보

다양한 데이터 손실 시나리오에서 500가지 이상의 삭제, 포맷 또는 손실된 문서, 사진, 비디오, 오디오, 아카이브 파일을 복구하는 3단계.

더 알아보기

뜨거운 기사

    관련 기사