6 Solutions to the Error of System_Thread_Exception_Not_Handled

Last Updated: 2021-12-31
0
(0)

Ringkasan: The error of System_Thread_Exception_Not_Handled is a common Windows issue that usually happens during boot time. Though it can also occur even if you are in the process of your work. In most cases, this issue creates a lot of inconveniences. In addition to the common cause of malfunctioned drivers, there are other culprits such as system incompatibility and memory conflicts. Whenever then error occurs, the computer shuts down, makes a bleep, and pops up with a blue screen. Based on the system configuration, your computer may restart itself. But the vexing part of the issue is that no matter how many times you try to reboot your PC, you will repeatedly see the BSOD. So, in this article, we will explain to you several effective solutions to it. Besides, if there are any data loss problems relating to this issue, you could always turn to Pemulihan Data Bitwar untuk bantuan.

MENANG VERSI VERSI MAC

How to Fix the Error of SYSTEM_THREAD_EXCEPTION_NOT_HANDLED

Solution 1: Reinstall Display Drivers

Display drivers are one of the most common causes of this error. You need to uninstall them and then reinstall the latest version of the display drivers. If you can log in to Windows, skip to step 6. But if you can’t, start with step 1.

Langkah 1: Boot your computer into safe mode.

Catatan: In safe mode, the computer will disable the drivers and services that are not necessary to run Windows. To boot the system into safe mode, you should turn on your PC and force it to shut down by pressing the power button. Repeat the aforementioned steps until the system starts in repair mode. (you might need to repeat those steps 4 to 5 times). This is the common way to trigger and push the system to go into repair mode.

Langkah 2: After entering the safe mode, navigate to Pemecahan masalah > Opsi lanjutan > Prompt Perintah. A memerintah prompt window will appear. Type in the following command and then press Memasuki.

BCDEDIT /SET {DEFAULT} BOOTMENUPOLICY LEGACY

Langkah 3: Ketik keluar lalu tekan Memasuki. Klik Melanjutkan.

Langkah 4: Reboot your system and keep pressing F8 ( or Shift + F8) before the Windows logo appears.  After that, the AdvancedBootOptions menu will pop up.

Langkah 5: Pilih SafeMode with Networking lalu tekan Memasuki. After that, the computer will boot into Safe Mode.

Langkah 6: Tekan Windows key + R. In the Run dialog, type in devmgmt.msc lalu tekan Memasuki.

Langkah 7: Dalam Pengaturan perangkat window, double-click on Menampilkan adapters to expand it. Right-click on your display driver, and then choose Copot pemasangan perangkat.

Langkah 8: Klik Delete the driver software for this device lalu klik oke. After rebooting your PC, video drivers will be reinstalled automatically.

Solution 2: Uninstall Recently Installed Third-Party Programs

As seen in several cases, an incompatible software application may trigger the issue of System_Thread_Exception_Not_Handled. If you installed any third-party programs just before the error happened, you could try uninstalling them to memperbaiki the issue.

Use the steps below to uninstall any recently installed programs.

Langkah 1: tekan Windows + R keys at the same time to launch the Lari kotak.

Langkah 2: Ketik Panel kendali lalu klik oke.

Langkah 3: Navigasi ke Program dan fitur to see all programs installed on your computer.

Langkah 4: Klik pada Installed On button, which will sort out all installed programs by date.

Langkah 5: Now, right-click on the incompatible programs to uninstall them.

Uninstall Recently Installed Third-Party Programs

Solution 3: Check and Repair Windows System Files

Having corrupt system files is another common culprit you should consider. You can use the CHKDSK tool to solve the issue. To do so, use the following steps:

Langkah 1: Klik kanan di Mulai Menu tombol.

Langkah 2: Pilih Command Prompt (admin).

Langkah 3: In the Prompt Perintah window, type in the following command and then press Memasuki:

chkdsk c: /f /r

CHKDSK

Langkah 4: It might take some time for the process to finish. After it’s done, reboot your computer and check whether the error is solved.

Solution 4: Disable Fast Startup

Many users reported that the fast startup feature provided by Windows could lead to the error of System_Thread_Exception_Not_Handled. It’s a feature that greatly reduces the time it takes for the system to boot up. Since disabling the fast startup feature will not affect your computer, you could try using this method to check whether the issue is fixed.

Langkah 1: tekan Windows + R key to open the Lari kotak.

Langkah 2: Ketik Panel kendali lalu klik oke.

Langkah 3: Klik Opsi Daya dari Panel kendali.

Langkah 4: Klik Pilih fungsi tombol daya lalu Ubah pengaturan yang saat ini tidak tersedia.

Langkah 5: Uncheck the box next to the option of Aktifkan startup cepat (disarankan).

Turn off Fast Startup

Solution 5: Run DISM command

If the error of System_Thread_Exception_Not_Handled is caused by corrupt or missing files, you can the aforementioned SFC commands to fix it. But if the error persists, you can try using the DISM command to solve it. Refer to the following steps to learn how to use it.

Langkah 1: Right-click on the Start Menu button and then select Command Prompt (Admin).

Langkah 2: In the Command Prompt window, type in the following commands and press Enter at the end of each line:

Disme /Online /Cleanup-Image /CheckHealth

Disme /Online /Cleanup-Image /ScanHealth

Disme /Online /Cleanup-Image /RestoreHealth

Run DISM

Langkah 3: After the process is done, reboot your computer to check whether this solution works.

Solution 6: Reset your PC

Resetting our PC is reckoned as the last resort for this issue but there is no doubt that it’s efficient and able to fix most of the BSOD issues, including the one discussed in this article. Refer to the following instructions to learn how to reset your PC.

Langkah 1: Press Win + I to open Settings.

Langkah 2: Navigasi ke Update & security > Recovery.

Langkah 3: Klik Get started di bawah section dari Setel ulang PC ini.

Reset The PC

Langkah 4: Click on either Simpan file saya atau Remove everything, depending on whether you want to prevent your files from being wiped out. However, no matter which way you choose, all of your settings will revert to their defaults, and apps on the PC will be uninstalled.

Langkah 5: Klik Just remove my files atau Remove files and clean the drive if you select Remove everything in the previous step. Cleaning the drive takes longer but will ensure that files will be permanently deleted, making recovery almost impossible.

Langkah 6: Klik Lanjut if a message pops up warning you that you won’t be able to roll back to a prior version of the operating system. Click on Mengatur ulang when you are prompted.

Langkah 7: Your computer will then reboot and take several minutes to reset itself. Click on Melanjutkan when prompted.

Cara Memulihkan File yang Hilang Menggunakan Pemulihan Data Bitwar

As seen in many cases, the error of System_Thread_Exception_Not_Handledmight corrupts the system files, leading to a data loss issue. But with the help of the right tool, you might be able to recover all the lost files. Although there are a plethora of recovery tools you can find on the Internet, Bitwar Data Recovery is among the best when it comes to recovering lost files resulting from tricky computer issues. Refer to the following steps to learn how it works like magic.

Langkah 1: Kunjungi situs web resmi kami, unduh Bitwar Data Recovery, lalu instal.

Langkah 2: Open the program and select the disk drive where the missing files were stored and click on Lanjut.

main interface

Langkah 3: Select a scan mode in this stage. We would like to suggest that you use Scan cepat, which is capable of retrieving a healthy number of lost files. If it fails to recover the files you want, you can re-run the software and select Memindai dengan seksama, yang lebih efektif.

scan mode

Langkah 4: Pilih jenis file yang ingin Anda pulihkan dan klik Lanjut.

file types

Langkah 5:Pratinjau the wanted files to check their intactness. Choose those files and then click Pulih untuk memulai pemulihan.

preview

Penting: To ensure that all the lost files you want will be recovered in an intact state, you should save those recovered files to other drives except for the one where the lost files were stored.

Kesimpulan

If you have enough knowledge about the error of System_Thread_Exception_Not_Handled, it is not tricky to solve. In this article, we have explained several effective solutions to this BSOD issue. Besides, if you have lost any data because of this error, you can always turn to Pemulihan Data Bitwar untuk bantuan.

Seberapa bermanfaatkah postingan ini?

Klik bintang untuk menilainya!

Penilaian rata-rata 0 / 5. Penghitungan suara: 0

Tidak ada suara sejauh ini! Jadilah yang pertama untuk menilai posting ini.

Artikel Sebelumnya

7 Solusi Efektif untuk Referensi dengan Kesalahan Pointer Summary: The error of System_Thread_Exception_Not_Handled is a common Windows issue that usually happens during boot time. Though it can also...

Artikel Berikutnya

Cara Mengatasi Kesalahan BSOD Pengecualian Toko yang Tidak Terduga di Windows 10 Summary: The error of System_Thread_Exception_Not_Handled is a common Windows issue that usually happens during boot time. Though it can also...

Tentang Pemulihan Data Bitwar

3 Langkah untuk mendapatkan kembali 500+ jenis dokumen, foto, video, audio, arsip yang dihapus, diformat atau hilang, dari berbagai skenario kehilangan data.

Pelajari Lebih Lanjut

Artikel Panas

    Artikel Terkait