6 Solutions to the Error of System_Thread_Exception_Not_Handled

Last Updated: 2021-05-31
0
(0)

Sommaire: The error of System_Thread_Exception_Not_Handled is a common Windows issue that usually happens during boot time. Though it can also occur even if you are in the process of your work. In most cases, this issue creates a lot of inconveniences. In addition to the common cause of malfunctioned drivers, there are other culprits such as system incompatibility and memory conflicts. Whenever then error occurs, the computer shuts down, makes a bleep, and pops up with a blue screen. Based on the system configuration, your computer may restart itself. But the vexing part of the issue is that no matter how many times you try to reboot your PC, you will repeatedly see the BSOD. So, in this article, we will explain to you several effective solutions to it. Besides, if there are any data loss problems relating to this issue, you could always turn to Récupération de données Bitwarpour aider.

GAGNER LA VERSIONVERSION MAC

How to Fix the Error of SYSTEM_THREAD_EXCEPTION_NOT_HANDLED

Solution 1: Reinstall Display Drivers

Display drivers are one of the most common causes of this error. You need to uninstall them and then reinstall the latest version of the display drivers. If you can log in to Windows, skip to step 6. But if you can’t, start with step 1.

Étape 1: Boot your computer into safe mode.

Noter: In safe mode, the computer will disable the drivers and services that are not necessary to run Windows. To boot the system into safe mode, you should turn on your PC and force it to shut down by pressing the power button. Repeat the aforementioned steps until the system starts in repair mode. (you might need to repeat those steps 4 to 5 times). This is the common way to trigger and push the system to go into repair mode.

Étape 2: After entering the safe mode, navigate to Dépannage > Options avancées > Invite de commandes. A commander prompt window will appear. Type in the following command and then press Entrer.

BCDEDIT /SET {DEFAULT} BOOTMENUPOLICY LEGACY

Étape 3: TapezSortirpuis appuyez surEntrer. Click on Continuer.

Étape 4:Reboot your system and keep pressing F8 ( or Shift + F8) before the Windows logo appears.  After that, the AdvancedBootOptions menu will pop up.

Étape 5: SélectionnezSafeMode with Networkingpuis appuyez surEntrer. After that, the computer will boot into Safe Mode.

Étape 6: PresseWindows key +R. In the Run dialog, type in devmgmt.mscpuis appuyez surEntrer.

Étape 7: Dans leGestionnaire de périphériques window, double-click on Affichage adapters to expand it. Right-click on your display driver, and then choose Désinstaller l'appareil.

Étape 8: Cliquer surDelete the driver software for this devicepuis cliquez surd'accord. After rebooting your PC, video drivers will be reinstalled automatically.

Solution 2: Uninstall Recently Installed Third-Party Programs

As seen in several cases, an incompatible software application may trigger the issue of System_Thread_Exception_Not_Handled. If you installed any third-party programs just before the error happened, you could try uninstalling them to fix the issue.

Use the steps below to uninstall any recently installed programs.

Étape 1:presseWindows + R keys at the same time to launch the Courirboîte.

Étape 2:TapezPanneau de commandepuis cliquez surd'accord.

Étape 3:Aller versProgrammes et fonctionnalités to see all programs installed on your computer.

Étape 4:Clique sur leInstallé sur button, which will sort out all installed programs by date.

Étape 5 : Now, right-click on the incompatible programs to uninstall them.

Uninstall Recently Installed Third-Party Programs

Solution 3: Check and Repair Windows System Files

Having corrupt system files is another common culprit you should consider. You can use the CHKDSK tool to solve the issue. To do so, use the following steps:

Étape 1: Clic-droitsur leLe menu Démarrerbouton.

Étape 2:SélectionnerInvite de commandes (administrateur).

Étape 3:Dans leInvite de commandes window, type in the following command and then press Entrer:

chkdsk c: /f /r

CHKDSK

Étape 4: It might take some time for the process to finish. After it’s done, reboot your computer and check whether the error is solved.

Solution 4: Disable Fast Startup

Many users reported that the fast startup feature provided by Windows could lead to the error of System_Thread_Exception_Not_Handled. It’s a feature that greatly reduces the time it takes for the system to boot up. Since disabling the fast startup feature will not affect your computer, you could try using this method to check whether the issue is fixed.

Étape 1:presseWindows + R key to open the Courirboîte.

Étape 2:TapezPanneau de commandepuis cliquez surd'accord.

Étape 3:Cliquer surOptions d'alimentationduPanneau de commande.

Étape 4:Cliquer surChoisissez ce que font les boutons d'alimentationpuisModifier les paramètres actuellement indisponibles.

Étape 5 : Uncheck the box next to the option of Activer le démarrage rapide (recommandé).

Turn off Fast Startup

Solution 5: Run DISM command

If the error of System_Thread_Exception_Not_Handled is caused by corrupt or missing files, you can the aforementioned SFC commands to fix it. But if the error persists, you can try using the DISM command to solve it. Refer to the following steps to learn how to use it.

Étape 1:Right-click on the Start Menu button and then select Command Prompt (Admin).

Étape 2: In the Command Prompt window, type in the following commands and press Enter at the end of each line:

Dism /En ligne /Cleanup-Image /CheckHealth

Dism /En ligne /Cleanup-Image /ScanHealth

Dism /En ligne /Cleanup-Image /RestoreHealth

Run DISM

Étape 3: After the process is done, reboot your computer to check whether this solution works.

Solution 6: Reset your PC

Resetting our PC is reckoned the last resort for this issue but there is no doubt that it’s efficient and able to fix most of the BSOD issues, including the one discussed in this article. Refer to the following instructions to learn how to reset your PC.

Étape 1: Press Win + I to open Settings.

Étape 2: Aller versUpdate & security > Recovery.

Étape 3: Cliquer surGet startedsous lesectiondeRéinitialiser ce PC.

Reset The PC

Étape 4: Click on either Garder mes fichiersouRemove everything, depending on whether you want to prevent your files from being wiped out. However, no matter which way you choose, all of your settings will revert to their defaults, and apps on the PC will be uninstalled.

Étape 5: Cliquer surJust remove my filesouRemove files and clean the drive if you select Remove everything in the previous step. Cleaning the drive takes longer but will ensure that files will be permanently deleted, making recovery almost impossible.

Étape 6: Cliquer surProchain if a message pops up warning you that you won’t be able to roll back to a prior version of the operating system. Click on Réinitialiser when you are prompted.

Étape 7: Your computer will then reboot and take several minutes to reset itself. Click on Continuer when prompted.

Comment récupérer des fichiers perdus à l'aide de Bitwar Data Recovery

As seen in many cases, the error of System_Thread_Exception_Not_Handledmight corrupts the system files, leading to a data loss issue. But with the help of the right tool, you might be able to recover all the lost files. Although there are a plethora of recovery tools you can find on the Internet, Bitwar Data Recovery is among the best when it comes to recovering lost files resulting from tricky computer issues. Refer to the following steps to learn how it works like magic.

Étape 1: Visitez notre site officiel, téléchargez Bitwar Data Recovery, puis installez-le.

Étape 2: Open the program and select the disk drive where the missing files were stored and click on Prochain.

main interface

Étape 3: Select a scan mode in this stage. We would like to suggest that you use Scan rapide, which is capable of retrieving a healthy number of lost files. If it fails to recover the files you want, you can re-run the software and select Analyse approfondie, ce qui est plus efficace.

scan mode

Étape 4: Choisissez les types de fichiers que vous souhaitez récupérer et cliquez surProchain.

file types

Étape 5:Aperçu the wanted files to check their intactness. Choose those files and then click Se remettrepour commencer la récupération.

preview

Important: To ensure that all the lost files you want will be recovered in an intact state, you should save those recovered files to other drives except for the one where the lost files were stored.

Conclusion

If you have enough knowledge about the error of System_Thread_Exception_Not_Handled, it is not tricky to solve. In this article, we have explained several effective solutions to this BSOD issue. Besides, if you have lost any data because of this error, you can always turn to Récupération de données Bitwarpour aider.

Cette publication vous a-t-elle été utile ?

Cliquez sur une étoile pour la noter !

Note moyenne0/ 5. Décompte des voix :0

Aucun vote pour l'instant ! Soyez le premier à noter ce post.

Article précédent

7 solutions efficaces à la référence par erreur de pointeur Summary: The error of System_Thread_Exception_Not_Handled is a common Windows issue that usually happens during boot time. Though it can also...

Article suivant

Comment résoudre l'erreur BSOD d'exception de magasin inattendue dans Windows 10 Summary: The error of System_Thread_Exception_Not_Handled is a common Windows issue that usually happens during boot time. Though it can also...

À propos de la récupération de données Bitwar

3 étapes pour récupérer plus de 500 types de documents, photos, vidéos, audios, fichiers d'archive supprimés, formatés ou perdus à partir de divers scénarios de perte de données.

Apprendre encore plus

Articles chauds

    Articles Liés