6 Solutions to the Faulty Hardware Corrupted Page Error

What Causes Faulty Hardware Corrupted Page Error

To better get your head around what the faulty hardware corrupted page error is, it is essential to know the possible causes behind the error. We have listed several causes below:

• Wrongly uninstalled or installed program.
• System file corruption resulted from virus attacks or malware attacks.
• Improper installation of Windows update.
• Outdated drivers.
• Windows registry corruption.
• Hard disk corruption.

How to Solve the Faulty Hardware Corrupted Page Error

Solution 1: Update Drivers

The first solution we recommend you to try is to update drivers, not least the Display Drivers. You may well speed up the fixing process of the issue by prioritizing this solution if the problem occurs after a Windows 10 upgrade. Updating your drivers is pretty easy and takes only a few minutes.

Refer to the following steps:

Schritt 1: Drücken Sie die Windows-Taste und R, type in devmgmt.msc und drücke dann Eintreten.

Schritt 2: double-click on Display Drivers.

Schritt 3: Rechtsklick auf Display Device und dann auswählen Update Driver Software.

Schritt 4: Auswählen Automatisch nach aktualisierter Treibersoftware suchen

Wait for your computer to search for an updated version of the device driver. If that works, the driver will be updated but when it doesn’t then you have to refer to the following steps:

Schritt 1: Return to Gerätemanager and then Double-click on Display Device.

Schritt 2: Wechseln Sie zum Treiber Tab.

Schritt 3: Write down the driver version displayed on this tab.

Schritt 4: Go to the manufacturer’s website, search your Display Device driver, download the latest version.

Schritt 5: Zurück zum Gerätemanager Fenster.

Schritt 6: Klicken Sie mit der rechten Maustaste auf das Display Deviceund wählen SieUpdate Driver Software.

Schritt 7: Klicke auf Browse my computer for driver software und dann Durchsuche.

Schritt 8: Navigate to the folder where you stored the downloaded driver version and then select it. Click on Offen.

Schritt 9: Klicke auf Nächste and follow later instructions.

After the driver has been uninstalled, reboot the PC. Its system will automatically install a new driver. Check whether the problem persists.

Solution 2: Turn off Fast Startup

Turning off fast startup is another working solution that serves users well. The Fast Startup feature makes your computer boot quickly compared with a normal startup.

However, it may well trigger problems because of the lack of adequate time for your drivers and programs to be activated fully. Refer to the following steps to learn how to turn off this feature:

Schritt 1: Drücken Sie die Windows-Taste + Rum das Feld Ausführen zu öffnen.

Schritt 2: Eintippen powercfg.cpl und drücke dann Eintreten.

Schritt 3: Klicken Sie auf die Choose what the power buttons do option on the left pane.

Schritt 4: Klicke auf Einstellungen ändern, die derzeit nicht verfügbar sind.

Schritt 5: Deaktivieren Sie das Turn on fast startup (recommended) Möglichkeit.

Schritt 6: Klicke auf Save Changes.

Schritt 7: Reboot your PC and check whether the error is still there.

Solution 3: Check RAM

Some users have reportedly solved the faulty hardware corrupted page issue by checking the RAM, then cleaning or replacing it. It’s most likely that there is a faulty RAM. So, we would like to advise you to check the RAM as well.

The first step is to take out the RAM, clean it to ensure that there isn’t any dust sticking on the slots and then put the RAM back. After that, re-insert the RAM and then make sure it is properly connected.

Turn on the system and check whether the problem persists. Mercifully, the problem would be solved. But, if the problem still occurs, then get prepared to check the RAM conditions with the help of some memory test program.

Windows-Speicherdiagnose

Users can use a Windows built-in memory diagnostic tool reserved for checking the memory. Although it has only limited options compared with other memory test programs, it does provide enough diagnostics for general RAMs. So, it is worth trying especially if you prefer not to download a third-party program.

Use the instructions given below to learn how to use the Windows Memory Diagnostic tool.

Schritt 1: Drücken Sie die Windows-Taste + Rdie öffnen Lauf Kasten.

Schritt 2: Eintippen mdsched und drücke Eintreten.

Schritt 3: Klicken Restart now and check for problems (recommended).

If this regular way of opening the tool goes haywire, you could instead try the following steps:

Schritt 1: Drücken Sie Win + Q to open the search bar.

Schritt 2: Eintippen Memory diagnostic tool.

Schritt 3: Rechtsklick auf Windows Memory Diagnostic and then click Als Administrator ausführen.

Schritt 4: Klicke auf Restart now and check for problems (recommended).

The Windows will reboot automatically and then initiate the testing. You will see the testing process. After the testing has finished, the computer will reboot again. Then you will be able to decide whether you need to change your RAM depending on the ensuing test results.

Manual Testing

Since the testing process may well take a lot of time, you can try to fix the problem if you have a spare RAM. You can replace the supposedly faulty RAM with the spare RAM to check if your computer still triggers the error.

Make sure that the spare RAM is in working condition and is compatible with the PC. If replacing your RAM fix the BSOD problem then the previous RAM is most likely the cause behind the issue.

Lösung 4: Führen Sie SFC . aus

As we have mentioned before, system file corruption might also be the cause behind the faulty hardware corrupted page error. in this case, you can try running System File Checker.

Schritt 1: Drücken Sie Windows + X und dann auswählen Eingabeaufforderung (Administrator) aus dem Menü.

Schritt 2: In the command prompt, type in the following command then press Enter.

sfc /scannow

Schritt 3: Wait for the scan process to finish.

Schritt 4: Reboot your computer to check whether this solution does the trick.

So stellen Sie verlorene Dateien mit Bitwar Data Recovery wieder her

The faulty hardware corrupted page error may well result in tricky data loss issues, Fortunately, files lost in this way can be recovered using our secure and reliable data recovery tool, Bitwar-Datenwiederherstellung.

Follow the steps below to recover your lost files!

Schritt 1: Herunterladen Bitwar-Datenwiederherstellung von Official Download Center and install it on your PC.

Schritt 2: Launch the recovery tool and then select the drive where the lost files were and then press the Nächsteum fortzufahren.

Schritt 3: You can select a scan mode. To beginners, we recommend Schneller Scan, which is capable of recovering a healthy number of lost files. If it doesn’t serve you well, you can use Tiefen-Scannächstes Mal.

Schritt 4: Klicken Nächste, select the file types you want to retrieve and then press the NächsteTaste.

Schritt 5:Vorschau all the files you want.

Schritt 6: Lastly, after previewing and selecting the files you want, click the Genesen button to begin the recovery process.

Fortschrittliche Lösungen

Solution 1: Reset your Operating System

If all the aforementioned solutions go haywire, there are two options left, one of which is resetting your operating system. But bear in mind that before using this solution, users had better back-up important data and files.

Refer to the following steps to learn how to use this solution:

Schritt 1: Drücken Sie Gewinnen + ich öffnen Einstellungen und dann auswählen Update und Sicherheit.

Schritt 2: Klicke auf Erholung auf der linken Tafel.

Schritt 3: Klicke auf Get Started under Reset this PC title and then click Remove Everything.

Schritt 4: Klicken Sie auf die Zurücksetzen Taste.

Schritt 5: After the resetting is done, the computer will install Windows automatically.

Solution 2: Run System Restore

Another working solution is System Restore. Bear in mind that you are able to run a system restore only if the computer has restore points. It’s best to run a system restore to a point before the problem occurred.

Schritt 1: Drücken Sie die Windows-Taste + Q, eintippen Create a restore point und dann öffnen Sie es.

Schritt 2: Klicken Sie auf die System Restore Option und klicken Sie dann auf Nächste.

Schritt 3: Choose a restore point.

Schritt 4: Klicken Nächsteum in den ausgewählten Zustand zurückzukehren.

Abschluss

In this article, we delineate how to tackle the faulty hardware corrupted page error, which usually occurs in three common scenarios. To help users facing this error that may be triggered by various causes, we have listed several working solutions for each case. Along with solutions, for users who also run into a data loss issue, we have also introduced a powerful and reliable data recovery tool Bitwar-Datenwiederherstellung, to help you retrieve lost files.