How to Fix This Memory Card Cannot Be Used

Last Updated: 2021-04-29
0
(0)

ملخص: Being strikingly portable, the memory card is widely seen in cameras. Most camera users who have encountered problems related to SD cards should be familiar with the common error, this memory card cannot be used. Since this error might well persist when you try to access it and transfer files on it to other storage devices, for users who don’t have a habit of regularly backing up files, this borders on a disaster. To help users cope with this error, in this article, we will explain several proven solutions to the error and introduce a reliable and powerful recovery tool, استعادة البيانات Bitwar, to help users recover lost files.

اربح النسخةنسخة ماك

What Causes This Memory Card Cannot Be Used?

How to Fix This Memory Card Cannot Be Used

In most cases, except for prominent physical damage, the error this memory card cannot be used seems to pop up for no reason. But when we looked into several scenarios posted by users, there were some shared causes among those faulty memory cards. Below are some of the most common:

  • Incompatibility between the memory card and the device
  • wrong ways of inserting the memory card
  • unsafe disconnection of the memory card from the device
  • Memory card corruption owing virus or other common errors
  • physical damage
  • نظام ملفات غير مدعوم
  • prolonged usage of the memory card

If you are looking for solutions to corrupted SD card problems, you can refer to the following link to learn some fleshed-out methods.

Basic Methods

Method 1: Make Sure the Memory Card Is Not Physically Damaged

Before using other methods, you should check out whether the memory card is physically damaged. They are known for being portable and convenient, but the edges inevitably increase vulnerability. Although some quality memory cards are usually designed to be tough and capable of weathering intense physical shocks, they are still so small that physical damage to them is hard to spot. Below are some common physical problems and how to tackle them respectively.

  • Water damage

Like many other electronic devices, memory cards are susceptible to water damage. Though some of them are touted as waterproof products, overlong saturation of a memory card can definitely lead to errors. If your memory card is wet, you can dehydrate it using a dry static-free cloth and then put it in place with dry air. If you have a dehumidifier, you can place the memory card near it for about 24 hours.

الأهمية: Don’t put the memory directly under sunlight lest the high temperature should damage it.
  • Accidental drops

If the memory card has gone through accidental drops, it could suffer from physical damage. And in most cases, due to their sizes, it’s hard to spot and there isn’t much you can do. Check out the metal connectors and clean dirt on them. Tight it up if there is something loose.

  • Electrical surge

A sudden increase in the amount of electricity could overwhelm the circuity inside the memory card and hamstring it. Again, there isn’t much you can do. You can try to ground the memory card by touching its metal connectors with another metal object, like a mental bench.

Method 2: Ensure the Memory Card Is Correctly Inserted

Carefully remove the memory card from the device and then insert it in the correct orientation. If that’s the cause of the error, it can be immediately solved.

Method 3: Make Sure the Memory Card Is Approved

As we have mentioned, the problem may result from incompatibility between the memory card and the device. You can go to the camera manufacturer’s website to check whether the device supports the memory card.

Recover lost data Using Bitwar Data Recovery

Besides indicating that the memory card is faulty, the error could trigger another alarming problem, data loss. Users have posted several cases, such as being deprived of access to the memory card. If you are experiencing the same problem, don’t worry, you can rely on our effective and user-friendly tool, Bitwar Data Recovery, to help you recover lost files. Refer to the following steps to see how it works like magic.

الخطوة 1: تحميلاستعادة البيانات Bitwar from our official website and install it.

الخطوة 2: Launch the software, select the memory card, and then press the التاليزر للمتابعة.

الخطوه 3: اختر وضع المسح. للمبتدئين ، نوصيمسح سريع، وهو قادر على استعادة معظم الملفات. إذا لم تخدمك جيدًا ، يمكنك المحاولةتفحص بعمقفي المرة القادمة.

الخطوة 4: Choose the file types you want to retrieve and then press the التاليزر.

الخطوة الخامسة:معاينةكل البيانات المختارة.

الخطوة 6: After choosing and previewing the files you want, click on the استعادةزر.

ملحوظة: In case lost files are overwritten, files to be recovered should be saved to other safe storage devices instead of the memory card.

طرق متقدمة

Method 4: Run Anti-Virus Software

If the memory card has been connected to a computer where viruses rampage, the memory card may well be corrupted. Connect the memory card to a virus-free computer, and run a reliable anti-virus tool to scan it and eradicate the virus in it. If the operating system is Windows 10, you can use the built-in program, windows Security, to scan the memory card for viruses. Use these steps to do so:

الخطوة 1: صحافةفوز + س، اكتب فيأمن Windowsوافتحه.

الخطوة 2: انقر فوقالحماية من الفيروسات والتهديدات.

الخطوه 3: انقر فوقاختيارات المسح.

الخطوة 4: يختارفحص مخصصثم انقر فوقإفحص الآن.

Run Anti-Virus Software

الخطوة الخامسة: Select the memory card in the Select Folder dialogue.

الخطوة 6: Wait for the scan to finish.

الخطوة 7: Reinsert the memory card into the device to see whether the error is fixed.

Method 5: Run a Chkdsk Scan

Issues like bad sectors and drive inconsistencies, which usually happen to hard drives or SSDs, might well cripple a memory card too. To check whether your memory card is suffering from this kind of issues and fix them if necessary, you can run a chkdsk scan, another working tool offered by Windows. Refer to the following steps to learn how to use the tool.

الخطوة 1: انقر بزر الماوس الأيمن فوق ملفقائمة البدأزر ثم حددموجه الأوامر (المسؤول).

الخطوة 2: Type in the below command line and then press يدخل.

chkdsk ج: / f

Run a Chkdsk Scan

الأهمية:Replace C with the letter of the memory card.

الخطوه 3: Wait for the scan process to finish.

الخطوة 4: Reinsert the memory card into the device to check out whether the problem persists.

Should you encounter problems when using Chkdsk, like لا يمكن لـ Chkdsk فتح وحدة التخزين لخطأ الوصول المباشر, you could click on the link to learn how to fix it or use Error Checking to run a graphical version of Chkdsk.

الخطوة 1: اكتب فيمستكشف الملفاتفي شريط البحث وافتحه.

الخطوة 2: Right-click on the memory card and then choose الخصائص.

الخطوه 3: Switch to أدواتوانقر علىالتحقق منزر داخلالتحقق من الخطأالجزء.

Error Checking

الخطوة 4: انقر فوقمسح محرك الأقراص to perform a scan.

Method 6: Format

If all the above-mentioned solutions fail to work, and you are sure that the error didn’t result from physical causes, you can format the memory card. It’s extremely effective but involves wiping out all the files on the memory card. If possible, transfer the data on the memory card to other safe storage devices before using the following steps:

الخطوة 1: صحافةفوز + إيلفتحمستكشف الملفات.

الخطوة 2: Right-click on the memory card and then choose صيغة.

Format

الخطوه 3: Choose a file system you want and then click يبدأ.

Tips on How to Avoid Memory Card Errors

When it comes to maintaining a healthy status of your memory card, we would like to recommend some tips to you, which can help you reduce the risk of encounter errors like this memory card cannot be used.

  • Use high-quality memory cards.
  • Don’t remove the memory card while the device connected to it is in use.
  • Don’t use the camera while its battery is low.
  • Use USB to transfer the data on the memory card to minimize the frequency of ejecting and inserting the memory card.
  • Replace old memory cards that have been sluggish due to overuse.
  • Stop using the device before the storage capacity of the memory card is filled to the brim.
  • Keep memory cards in a safe place free from water, dust, static electricity, and high temperature.

استنتاج

The error this memory card cannot be used is an annoying problem facing camera users. Because of various possible causes, there is no silver bullet that can solve the error in every scenario. But as we looked into the problem, we did find some common and working solutions and then presented them in this article. On top of that, considering some users’ need to recover lost files from the faulty memory card, we have introduced a reliable and user-friendly recovery tool, Bitwar Data Recovery, which can help you bring lost files back in minutes.

ما مدى فائدة هذا المنشور؟

انقر على نجمة لتقييمها!

متوسط تقييم0/ 5. عدد الأصوات:0

لا توجد أصوات حتى الآن! كن أول من يقيم هذا المنشور.

المقال السابق

3 Simple Ways to Enable NTFS on Mac Device Summary: Being strikingly portable, the memory card is widely seen in cameras. Most camera users who have encountered problems related...

المادة التالية

كيفية إصلاح خطأ الموت الزرقاء 0x00000024 Summary: Being strikingly portable, the memory card is widely seen in cameras. Most camera users who have encountered problems related...

حول Bitwar Data Recovery

3 خطوات لاستعادة أكثر من 500 نوع من المستندات والصور ومقاطع الفيديو والتسجيلات الصوتية وملفات الأرشيف المحذوفة أو المنسقة أو المفقودة من سيناريوهات فقدان البيانات المختلفة.

يتعلم أكثر

مقالات ساخنة

    مقالات ذات صلة