How to Recover Lost Files From a Drive Affected By Bad Sectors

2020-06-05
5
(1)
Summary: In this article, we are going to explain to you how to recover lost files from a hard drive affected by bad sectors, one of the trickiest issues common computer users may well run into. With the help of Bitwar Data Recovery, you could easily retrieve lost files from this kind of faulty drives. Besides, this article will also cover some basic but useful information you need to know about bad sectors.

What Are Bad Sectors?

To put it simply, bad sectors on a hard drive are sectors that go inaccessible or corrupted resulting from various causes. Those tiny faulty clusters of storage space can’t respond to any requests from users, neither read nor write.

What Are the Causes Of Bad Sectors?

Broadly speaking, there are mainly two types of bad sectors, namely logical and physical. Refer to the following information to learn each kind and their common causes.

Common causes of logical bad sectors: System crash, virus infection, software conflict, sudden shutdown, reboot Of computer, sudden power outage etc.

Common causes of physical bad sectors: Overheat, dust, impact, wearing out, faulty blocks, overclocked PCI bus speeds etc.

How to Repair Bad Sectors

CHKDSK Scan

Windows has a built-in tool called chkdsk, which can help you scan your hard drives for bad sectors, marking physical ones as bad and repairing logical ones to make them usable again. If the system thinks that there’s a problem with one of the hard drives on the computer, it will automatically launch this tool when your computer boots up. But you’re also free to launch this tool manually whenever you wish.

Step 1: Right-click on the Start button and click on Command Prompt (Admin).

Step 2: Type in the following command and press Enter:

chkdsk C:/f
Note: Replace C with your drive letter.

Run a CHKDSK Scan

Step 3: Wait for the process to finish. 

Step 4: Reboot your computer to see whether the error persists.

Error Checking

If there are any problems with the CHKDSK tool that prevents you from running the tool, you can also use Error checking, a graphical version of Chkdsk.

Step 1: Press Windows key + E to open File Explorer.

Step 2: Right-click on the faulty disk drive and then click Properties.

Step 3: Click on the Tools tab.

Step 4: Click on the Check button within the Error checking section.

Error checking

Step 5: Click on the Scan drive button to confirm your operation.

How To Recover Lost Files From a Drive Affected By Bad Sector

In most cases, at the outset, users can follow the usual steps to run Bitwar Data Recovery and perform a quick scan:

Step 1: Download Bitwar Data Recovery from our official website and install it.

Step 2: Launch the software, choose the faulty disk drive where the lost files were stored and then click on Next.

main interface

Step 3: In this stage, you can select a scan mode. We would like to suggest Quick Scan, which is capable of recovering most lost files. If it fails, you can come back to this stage and then use Deep Scan, which is more effective.

scan mode

Step 4: Select desired file types and click on Next.

file types

Step 5Preview scanning results to check their intactness. Select files you want and click on Recover.

Important: Bear in mind that to avoid the risk of overwriting lost files that have yet to be recovered, you should save those recovered files to other disks except the one where the lost data were stored.

However, given the fact that the faulty hard drive may be fraught with bad sectors, the progress bar on the final stage may freeze and refuse to go on anymore. The reason for this gridlock is that those bad sectors affecting the hard drive prevent the tool from scanning them.

In this case, you can use Range Settings, one of the features offered by Deep Scan, to get around those bad sectors and complete the recovery. For instance, if by using Quick Scan, the progress bar on the final stage halts at 90%, you can set the tool to scan the part of the drive from 0% to 90%, as the following images show.

deep scan range settings

After you have successfully recovered lost data from this part of the faulty drive, you could decide whether or not to scan the remaining sectors. If files you have recovered don’t include what you want, you could try to set the Range Settings again. This time you could tweak the tool to make the tool scan the drive from 91% to 100%, if it halts, re-run the tool and make it scan from 92% to 100%. Repeat this process until the progress bar works normally and the recovery is successful.

Video Tutorial

Check out this video to learn how to use the Range Settings feature:

How useful was this post?

Click on a star to rate it!

Average rating 5 / 5. Vote count: 1

No votes so far! Be the first to rate this post.

Previous Article

How to Recover Inaccessible Files in a Raw Partition Summary: In this article, we are going to explain to you how to recover lost files from a hard drive...

Next Article

Software Purchase, Activation and Update Summary: In this article, we are going to explain to you how to recover lost files from a hard drive...

Related Articles

    X