What Is Column Address Strobe (CAS) Latency?

Last Updated: 2021-10-22
4.9
(52)
Sommaire: Many of us are familiar with CAS Latency. So look here to learn all you need to know about CAS (Column Address Strobe) Latency.

Definition Of CAS Latency

Column Address Strobe (CAS) latency, also called CL, is the READ command and the available moment data. The interval is specified in nanoseconds in asynchronous DRAM. In contrast, the interval is specified in clock cycles in synchronous DRAM.

As the latency depends on the number of clock ticks rather than the absolute time, the exact time for the SDRAM module to respond to CAS events may vary depending on the use of the same module if the clock rate is different.

The CAS latency for the RAM module is the number of clock cycles that RAM needs to access a particular data set in one of its columns and make the data available on its output pins.

In general, a RAM kit with a CAS of 16 requires 16 RAM clock cycles to complete this task. That is, the lower the CAS latency, the less RAM is required. Besides, you should note that CAS latency can be described in several ways. Specifically, the RAM kit with a CAS delay of 16 can be written as CAS 16 or CL16. Furthermore, two different RAM kit may have the same data transfer rate.

RAM Speed VS RAM Latency

Although the data transfer rate of RAM indicates how many giant transfers RAM can perform in a second, CAS latency is also vital for understanding RAM performance.

CAS latency tells RAM the total number of cycles required to send data, but to better understand the overall latency of that RAM, the duration of each cycle should also be taken into account.

Though DDR4 RAM is updated with higher storage density and power efficiency than DDR3 RAM, its CAS latency tends to be higher. The CAS latency for DDR3 RAM is typically 9 or 10, while the CAS latency for DDR4 is at least 15. However, due to its faster clock speed, newer standards have better overall performance.

Conclusion

The Column Address Strobe (CAS) Latency is not hard to understand. After going through this page, you may have a better understanding of it.

Cette publication vous a-t-elle été utile ?

Cliquez sur une étoile pour la noter !

Note moyenne4.9/ 5. Décompte des voix :52

Aucun vote pour l'instant ! Soyez le premier à noter ce post.

Article précédent

Des moyens faciles d'installer et de désinstaller des thèmes dans Microsoft Edge Summary: Many of us are familiar with CAS Latency. So look here to learn all you need to know about...

Article suivant

Toutes les bases du protocole de transfert de fichiers (FTP) Summary: Many of us are familiar with CAS Latency. So look here to learn all you need to know about...

À propos de la récupération de données Bitwar

3 étapes pour récupérer plus de 500 types de documents, photos, vidéos, audios, fichiers d'archive supprimés, formatés ou perdus à partir de divers scénarios de perte de données.

Apprendre encore plus

Articles chauds

    Articles Liés