11 Methods of Solving the 0xc00000e Error

What Is the 0xc00000e Error Code in Windows 10?

0xc00000e is an error that might occur when a PC is in the process of startup. It usually takes on the two following forms:

• A black screen with the title that reads “Windows Boot Manager” in a grey banner at the top of the screen. The accompanying message runs, “The selected entry could not be loaded because the application is missing or corrupt.”
• A blue screen with the headline that reads “Your PC Needs To Be Repaired” and the message below that reads “A required device isn’t connected or can’t be accessed.”

What Causes the 0xc00000e Error Code？

A rule of thumb for lowering the risk of encountering the 0xc00000e error code is to correctly shut down your PC when you’re done with it. However, if you run into this error, you can use the working methods listed below.

Method 1: Check Physical Device Connections

You can start by checking if any external devices connected to your PC get loose. The reason why we prioritize the method is that if the BIOS or UEFI in your computer are configured in such a way that the external device is set to boot before the computer’s hard disk, it will hinder the booting process. Instead of booting into your system’s disk drive, your computer will wrongly try to boot into some external device. Consequently, the upshot is that the computer will prompt the 0xc00000e error code.

Examples of external devices that might well trigger such issues include Pen Drivers, DVDs, CDs, and other USB Storage Devices.

Method 2: Rebuild Boot Configuration Data

Once we are sure that the hardware is not the culprit, let’s take a look at a more likely source of the 0xc00000e error. As we have mentioned before, corrupted or misconfigured BCD files might well cause the error. What compounds this problem is that it can’t be tackled within the Windows interface. You must get a recovery drive with Windows 10 installation. And before starting, you will also need to change the boot order by booting into BIOS and making the PC boot from the installation media instead of the hard drive. To do so, use these steps:

1 단계: Restart the computer.

2 단계: Right after the computer has been powered on, enter the BIOS settings by pressing the key your motherboard manufacturer has designated. Common keys include F2, F8. F10, F12, Esc, Delete, and Backspace. You can google to learn how to enter the BIOS settings of your computer model.

3 단계: Switch to the Boot tab and then change the boot order.

4 단계: Save your settings and shut down the computer.

After you have changed the boot order, use these steps to rebuild the BCD:

1 단계: Insert the Windows 10 bootable media you have prepared.

2 단계: When seeing the Windows Setup dialog box, set everything to the proper values and choose your language.

3 단계: 로 이동 Repair your computer > Troubleshoot > Advanced options.

4 단계: 클릭 명령 프롬프트 그것을 열려면.

5단계: Type in the following commands and then press 입력하다 after each one of them.

6단계: Reboot your computer to see whether the error is solved.

If the command prompt is not functioning well on your computer, you can click the link of the article to look for methods: [수정됨] 명령 프롬프트가 작동하지 않는 문제를 해결하는 방법.

Method 3: Repair the OS of Your PC With the Recovery Drive

With the Windows 10 bootable media, another method of fixing the 0xc00000e error is by repairing the OS of your PC. Use these steps:

1 단계: Insert the Windows 10 bootable media you have prepared.

2 단계: When seeing the Windows Setup dialog box, set everything to the proper values and choose your language.

3 단계: 로 이동 Repair your computer > Troubleshoot > Advanced 옵션.

4 단계: Click on Command Prompt to open it.

5단계: Type in the following command and then press Enter.

6단계: After the process has been completed, reboot the computer to see whether the problem persists.

Method 4: Enable Windows 10 WHQL Support In BIOS

Some of the OEMs offer Windows 10 WHQL setting, which boasts two basic functions: it allows users to enable UEFI support and checks for signed drivers during the boot process. Users of Windows 10 must enable it so that the computer can successfully boot. If it is not enabled, you might run into the 0xc00000e error. Hence users can try accessing BIOS to check whether the feature is enabled. Use these steps to do so:

1 단계: Shut down your computer and reboot it after a few minutes.

2 단계: Enter the BIOS mode and look for the Windows WHQL setting in the BIOS.

3 단계: Select the Windows WHQL setting and then change the status of it to Enabled.

4 단계: Reboot your PC to see if this method solves the error.

Method 5: Reset BIOS/UEFI Configuration

Some users have reported that they solved the 0xc000000e error by resetting their BIOS/UEFI configurations. So, we would like to advise you to try this method to see whether it can solve the error.

Step 1: Open BIOS Menu

To reset BIOS configuration, users should access the BIOS menu to find the Default settings option.

There are two ways for Windows 10 users to access the BIOS menu.

Way 1: Click on Start and then Power. With the Shift key pressed and held, click on the Restart button to reboot Windows in Windows Recovery Environment. And then Navigate to Troubleshoot > Advanced Options > UEFI firmware Settings. Finally, click on Restart to bring up the BIOS settings screen.

Way 2: Restart your PC. Right after it has been powered on, press the required key to enter into the BIOS settings window.

Step 2: Find Setup Defaults

You might fail to find an option called Setup Defaults since, depending on the computer model, the name and location of this option may vary. Other names include Load Defaults, Load BIOS Defaults, Load Optimical Default, etc.

Step 3: Reset BIOS

Select the Setup Defaults and then press Enter to begin resetting the BIOS to factory settings. After it has finished, press F10 to save and exit BIOS. The computer will automatically reboot. Check whether the error persists.

Method 6: Mark the Boot Disk as Online

In some rarer cases, your computer might well mark as offline the disk that you have connected to the computer to serve as bootable media. The reason is that by preventing extra hardware, applications, and other items from being launched when the computer starts, the startup experience can be improved. Hence, if this should be the cause of the error, you can use the following steps to mark the boot disk as online.

1 단계: Boot your PC from the bootable media.

2 단계: 로 이동 Next > Repair your computer and then enter winRE.

3 단계: 로 이동 문제 해결 > 고급 옵션 > 명령 프롬프트.

4 단계: Enter your login credentials if asked by the computer.

5단계: Type in the following command and then press Enter to launch the diskpart utility.

6단계: Type in the following command and then press Enter to list the disk drives that are currently connected to your PC.

7단계: Type in the following command and then press Enter to select the bootable media.

단계 8: With the bootable media successfully selected, you should type in the following command line and then press Enter to mark it as online.

9단계: Type in the following command and then press Enter to exit.

10단계: Reboot the computer to see whether this method can solve the error.

Method 7: Boot Windows 10 in Safe Mode

If the solutions mentioned above fail to fix the problem, you can try booting Windows into safe mode. In this mode, your PC will boot with many non-core components disabled, such as add-ons and startup programs, allowing users to run troubleshooting.

But before entering the safe mode, users should enter the Windows Recovery Environment (winRE). To do so, you need repeatedly turn your computer OFF, then ON:

1 단계: Press the power button and hold it for 10 seconds.

2 단계: Press the power button again to boot your computer.

3 단계: After seeing the first sign of Windows, press the power button for 10 seconds again to turn off the computer.

4 단계: Press the power button to boot your computer.

5단계: Repeat step 3 and step 4.

6단계: Allow the computer to fully reboot, and it should enter the Windows Recovery Environment (winRE).

Since you are in the Windows Recovery Environment, you can use these steps to enter the safe mode:

1 단계: At the Choose an option stage, Navigate to Troubleshoot > Advanced 옵션.

2 단계: Click on the Startup Settings option and then Restart.

3 단계: After the computer has restarted, select the 4 option in the list that has popped up and then press F4 to enter Safe Mode.

Method 8: Run the Check Disk Command

If the file integrity of the hard drive is corrupted, it’s sensible to use the CHKDSK utility, a built-in tool provided by Windows, to scan the disk drive and then fix any problems it finds.

1 단계: Insert the bootable media into your PC.

2 단계: Boot your computer from the media.

3 단계: 클릭 다음 and then Repair your computer.

4 단계: 로 이동 Troubleshoot > Advanced > Command Prompt

5단계: Enter your login credential if asked by the computer.

6단계: Type in the following command in the Command Prompt window and then press Enter to run the CHKDSK utility.

chkdsk X: /f
노트: Replace the letter X with the drive letter of your partition.

7단계: Confirm any pop-ups and wait for the scan to finish.

8단계: Reboot your computer to see if the error persists.

Method 9: Disable Fast Startup

If your computer has been set up to use the Fast Startup feature, you might be getting this error message on your screen because of doing so. The Fast Startup feature is known to malfunction with some operating systems and hardware combinations.

It’s reported that users who enable the Fast Startup feature in their computers have encountered the 0xc00000e error. While the feature has served many users well, it’s certainly incompatible with some hardware and operating system.

Generally, with this feature enabled, the computer automatically sends some configurations that aim to stay in the RAM, which prompts a faster startup. The setback of this feature is that it might get corrupted, thus triggering the 0xc00000e error. Hence, to tackle it, you could use these steps to disable it completely.

1 단계: 누르다 승리 + R 열다 운영 상자.

2 단계: 입력 제어판 그런 다음 엽니다.

3 단계: Change the 보다 by option to Category.

4 단계: 로 이동 Hardware and Sound > Power Options > Choose what the power buttons do

5단계: On the right pane, click on the 현재 사용할 수 없는 설정 변경 옵션.

6단계: Scroll down and uncheck the Turn on the fast startup 옵션.

7단계: Save your settings and then shut down your computer.

8단계: Wait for a few minutes and then power on the computer to see whether the error is solved.

Method 10: Use system file checker

System file corruption is a common scenario that is capable of triggering tricky errors, one of which is the 0xc00000e error. To fix it, we recommend that you perform a complete scan and repair of those corrupted system files by using the following steps:

1 단계: 누르다 승리 + R 열다 운영 상자.

2 단계: 입력 명령 그런 다음 누르십시오 Ctrl + Shift + Enter to open the elevated command prompt.

3 단계: Type in the following two command lines and then press 입력하다 after each of them.

4 단계: Restart your PC after the scan has finished.

5단계: Check if the error persists.

Method 11: Run Windows Startup Repair

Startup Repair is another useful tool that is capable of scanning system files, registry settings and configuration settings. It’s particularly useful when a computer is unbootable. If you are confronted by the 0xc00000e error and consequently, the computer fails to boot, you can use Startup Repair to fix the error. Because of the failure to boot, the computer will automatically enter WinRE. But if that fails too, you can interrupt the boot process as Method 7 shows to enter WinRE. Besides, if you have a bootable media in hand, you can use it to enter WinRE. After entering WinRE, use these step to run Startup Repair:

1 단계: Navigate to Troubleshoot > Advanced Options.

2 단계: 선택하다 시동 복구 to start the repairing process.

3 단계: After the computer has ended, wait for the computer to reboot automatically.

Bitwar Data Recovery를 사용하여 손실된 데이터 복구

If you lose some data or forget to save them after encountering the 0xc00000e error, Bitwar Data Recovery is the ideal tool that can help you recover them. It’s reliable, effective, and capable of recovering data from Recycle Bin, corrupted SD cards, formatted drives and much other storage media. Refer to the following steps to learn how it works:

1 단계: 공식 웹사이트에서 Bitwar Data Recovery를 다운로드하여 설치합니다.

2 단계: Open the tool and choose the storage medium where the missing data were stored, and then click 다음.

3 단계: 이 단계에서 스캔 모드를 선택합니다. 우리는 추천하고 싶습니다 빠른 검사, 정상적인 수의 손실된 파일을 복구할 수 있습니다. 작동하지 않으면 소프트웨어를 다시 실행하고 사용할 수 있습니다.면밀히 살펴보다, 더 효과적입니다.

4 단계: 복구하려는 파일 유형을 선택하고 다음.

5단계:시사 온전함을 확인하기 위해 원하는 파일. 해당 파일을 선택하고 복구를 클릭하여 복구 프로세스를 시작합니다.

결론

In this article, we have introduced a common kind of BSOD (blue screen of death), the error code of which is 0xc00000e. Although the number of causes of this error is not as many as other errors, it’s still a vexing problem since the error message shows scarce useful information. Hence, in order to cover as many cases as possible, we have tried to present both common and uncommon solutions to this error. And on top of those solutions, considering the fact that this error could lead to data loss, we introduce a reliable and effective data recovery program, Bitwar Data Recovery. Users whose work has been cut short because of the annoying error can use this tool to bring their valuable data back.