Site icon Bitwarsoft

How To Show, Hide, And Assign Drive Letter In Windows?

How To configure Drive Letter
Summary: To make it easier to identify the drive, File Explorer displays the drive name next to the drive name With default settings. But sometimes, you may need to hide the drive letter of a drive. So this article will show you efficient ways to show, hide and assign drive letters in Windows File Explorer.

A drive letter is a single letter character A to Z assigned to a computer drive or drive partition. Drive name and drive letter are two ways to identify drives in Windows 10 File Explorer.

If you cannot see the drive letter of one or more drives in File Explorer, it might be because File Explorer is configured to hide drive letters, or the drive does not have a drive letter.

Show Or Hide Drive Letter

Step 1: First, open the Folder Options. There are many ways to open Folder Options in Windows 10. You can open File Explorer and click the File menu, and then click Change folder and search options.

Step 2: Then, click the View tab, and check the box of Show drive letters option to show the drive letters. Uncheck the option if you want to hide the drive letters.

Step 3: Finally, click the Apply button to save the changes.

After doing the above steps, if the drive letter still does not appear to a specific drive or partition, it may be because the drive or partition is not assigned to it. Therefore, you need to assign or remove the drive letter.

Assign Drive Letter

Assign Drive Letter Using Disk Management

Step 1: Type Disk Management in Start search box and press Enter to open Disk Management.

Step 2: Then, right-click the drive, which doesn’t have a drive letter, or you want to assign a drive letter for. And then, choose “Change Drive Letter and Paths” option.

Step 3: Click the Change button and select a different letter to replace the current one from the drop-down box.

Step 4: Click the Remove if you need to remove the drive letter.

Assign Drive Letter Using PowerShell

Using PowerShell is another easy way to assign the drive letters.

Step 1: Type PowerShell in the Start search box and select Run as Administrator option. Then click Yes when a confirmation window appears.

Step 2: Type in “Get-Disk” and press Enter to list available drivers.

Step 3: Then type in the following command and press Enter.

Get-Partition -DiskNumber 1 | Set-Partition -NewDriveLetter R

Assign Drive Letter Using CMD

You can also use Diskpart in Command Prompt to change the drive letter in Windows 10.

Step 1: First, type in “CMD” in the Start search field and select Run as Administrator option. Then click Yes when a confirmation window pops up.

Step 2: Type in “diskpart” and press Enter. Then type in the “list volume” command and press Enter.

Tip: Here, you should know the number of the simple volume for which you want to change, remove, or assign a drive letter.

Step 3: Type in “select volume 2” and press Enter to select the drive or volume to assign the drive letter.

Step 4: Then type in “assign letter=G”, and press Enter.

It is not recommended to change or remove the drive letters of drives where you install programs. If the drive letter of a drive where you install Windows 10 has been changed, the program may not start.

Final Words!

After following the above methods, you can easily show, hide and assign drive letter in Windows. Thus, do not hesitate to have a try.

 

Exit mobile version