Tips For Fixing Computer Power Button Not Working

Last Updated: 2022-05-10
5
(1)
Summary: The PC power button not working is a common problem when turning on the machine. What should you do if you press the button and nothing happens? From reading the post, you will have the best tips to fix this issue. 

Overview Power Button not Working  on PC

The power button on a computer is an essential component. When you press it, it turns on your machine, loading the Windows operating system to the desktop so you can do something. However, sometimes you will find that nothing happens when you press the button. So what should you do to make the power button workable on a PC?

There are many reasons why the PC power button does not work, such as the power cable, dirty or power supply button, faulty PSU, etc.

If you do encounter such an issue, do not worry, we have listed the solutions for your reference. Just follow the troubleshooting tips below.

Solutions to Fix PC Power Button Not Working

Solution 1: Check your power supply

The Power Supply Unit (PSU) is an important part of the computer and is responsible for converting the mains AC power to low voltage regulated DC power.

Solution 2: Clean the power button

If debris gets into the power button, it may stop working. What you need to do is clean this button. Special tools and expertise are required, if you don’t know how to do it, ask an expert for help.

  1. Remove the side panel, front bezel, and top cover of the computer.
  2. Spray contact cleaner on the power button.

Solution 3: Turn on the computer manually without the power button

When you encounter the PC power button not working, you can try another method to turn on the computer – through the motherboard.

  1. Locate the power switch pins on the motherboard.
  2. When connecting the PC to the power source, use a conductive tool to touch these pins together.
  3. The motherboard can receive the power signal from this computer and it can boot.
  4. You can shut down the PC by touching these pins again.

Solution 3: Change the power button

When you encounter the problem that the power button of the computer is not working, you can replace the power button and see if it can help you.

  1. Disconnect the PC power button connector from the motherboard.
  2. Use a screwdriver to remove the plastic panel from the case.
  3. Remove the power switch from the power button on the front panel. If it is difficult to remove the switch, the seal will need to be forcibly broken.
  4. Buy a new power button and install it on your PC.

Conclusion

Facing the issue of the power button not working on a PC is very common, by using the above-mentioned ways, you can easily fix the power button not working issue, hope they help you really.

How useful was this post?

Click on a star to rate it!

Average rating 5 / 5. Vote count: 1

No votes so far! Be the first to rate this post.

Previous Article

Recover Lost Data In CF Cards Using Best Data Recovery Software Summary: The PC power button not working is a common problem when turning on the machine. What should you do...

Next Article

Fixed: External Hard Drive Can Not Eject From Windows 10 Summary: The PC power button not working is a common problem when turning on the machine. What should you do...

About Bitwar Data Recovery

3 Steps to get back 500+ kinds of deleted, formatted or lost documents, photos, videos, audios, archive files from various data loss scenarios.

Learn More

Hot Articles

    Related Articles