5 Best Methods for Fixing the Critical Process Died Error

2021-04-07
0
(0)

Summary: Critical process died is an error that pops up with a Blue Screen of Death also known as BSOD. This error can come up at any time but it usually occurs after a Windows Upgrade or a Windows Install. However, there are plenty of users who have experienced this error at various other stages like while playing a game or on Windows startup. Since there can be many reasons behind this error, we will lay out a wide range of methods in this article. And given the prospect of data loss triggered by this BSOD, we will also explain to you how to use Bitwar Data Recovery to retrieve your lost files.

WIN VERSION MAC VERSION

What Causes Critical Process Died Error

Critical Process Died Error

To better understand what the critical process died error is, it is essential to know the possible causes behind the error. We have listed several causes below:

  • Hardware issue with RAM
  • Loose connection on hard drives
  • outdated BIOS
  • Antivirus interference

How to Fix Windows Stop Code Critical Process Died

Method 1: Check Drivers

The very first method that we recommend you to try when you run into a  Critical Process Died error is to check the drivers. Faulty drivers problem is one of the most common causes of this error. If you suspect that there is problematic hardware or a faulty driver in your PC, you could use the following steps to fix it.

Note: Since the problem could happen to any driver, we will only explain the steps to solve the issue for one device. You can repeat the steps for other drivers. The purpose of this method is just to show you how to solve one particular problem, the steps will be the same for other faulty drivers.

Step 1: Press Windows key +to open the Run box.

Step 2: Type in devmgmt.msc and then press Enter.

Step 3: Locate and expand the Sound, video and game controller tree by double-clicking on it.

Check if any of your devices show a yellow warning sign, which signals a problem. If a red sign instead comes up, it means that the Windows system is having a problem when trying to establish a connection with the device.
The instructions for handling both cases are given below. You should also check other devices in the device manager to make sure that there are no warning signs.

If there is a yellow warning sign, then do the following:

Step 1: Right0-click on your device and select Update Driver.

Step 2: Choose Search automatically for updated driver software.

If by doing so the computer doesn’t find any update, you could go to your sound card manufacturer’s website to look for the latest driver version. THen download the latest driver from the website and save it to a place where you can find it easily. After you have saved the latest drier version, use these steps:

Step 1: Press Windows key + R. Type in devmgmt.msc and then press Enter.

Step 2: Locate and double click Sound, video and game controller.

Step 3: Right-click on your sound card and then select Properties.

Step 4: Switch to the Driver tab.

Properties

Step 5: Look at the driver version and compare it with the latest version you have downloaded. If it isn’t, close this sound card properties window.

Step 6: Select the sound device in the Device Manager window and then right-click on it. Select Update Driver.

Step 7: Select Browse my computer for driver software.

Step 8: Click on Browse and navigate to the place where you store the downloaded driver. Select the driver and then click Open.

Step 9: Click on Next and then follow the on-screen instructions.

If the problem still remains, you could uninstall the driver and let your computer automatically install the needed drivers. To do so, use the following steps:

Step 1: Press Windows keyR.

Step 2: Type in devmgmt.msc and then press Enter.

Step 3: Locate and double-click on Sound, video and game controller.

Step 4: Select your sound card and then right-click on it. Select Uninstall and follow on-screen instructions.

Uninstall

Step 5: Restart your computer.

If you see a red sign with your device then do the following:

Turn off your computer, open the computer case to check the device is connected correctly. You could also take the device off to check out any physical damage. Once finishing checking, re-insert the device and then reboot your computer.

Method 2: Turn off SpeedBoost

If you are up against the problem of booting into your Windows, you could make several changes to the settings in the BIOS to control the way your PC boots. Lowering or turning off these fast boot features have proved their applicability to this issue.

Use the steps given below to turn off some settings:

Step 1: Reboot the computer.

Step 2: Press F2 when you see the manufacturer’s logo. The key for entering the BIOS settings varies depending on your manufacturer, but you could take a shot at F10 and Del as well.

Step 3: Generally, you should be in your BIOS. if not, you should see a menu with multiple options, one of which is BIOS settings or the like. You can use arrow keys to navigate through the list and choose the BIOS option. Press Enter to confirm what you choose.

Step 4: In the BIOS, look for options related to SpeedBoost. The name may well vary depending on your manufacturer. Anyway, there should be an option associated with the speed of the boot. Turn that feature off.

Step 5: After you have turned this option off, save the changes you made and exit the BIOS. Reboot your PC and check if the problem whether solved.

Method 3: Run SFC & DISM

SFC is shorthand for System File Checker and DISM for Deployment Image Servicing and Management. The two Windows built-in tools are used to fix corrupt system files. We recommend you to use them especially if the critical process died error occurred after you had installed the Windows or performing a Windows Upgrade. Refer to the following steps to learn how to use the two tools.

SFC:

Step 1: Right-click on Start Menu and then select Command Prompt (Admin).

Step 2: In the Command Prompt window, type in the following command and then press Enter:

SFC /scannow

Run SFC

Step 3: After finishing the scan, exit Command Prompt and reboot the computer.

DISM:

Step 1: Press Win + Q, type in Command Prompt, right-click on it and then select Run as Administrator.

Step 2: Type in the following line and then press Enter.

Dism /Online /Cleanup-Image /CheckHealth

Step 3: If the command finds no problem after you have entered the above-mentioned command, type the following line and then press Enter:

Dism /Online /Cleanup-Image /ScanHealth

Step 4: If the scanning result shows that problems do exist, You can use the following command to repair those problems. The whole process may well take up to 10 minutes if necessary.

Dism /Online /Cleanup-Image /RestoreHealth

Run DISM

Step 5: Once the restoration is done, restart your PC to see whether the issue persists.

Method 4: System Restore

Note: System Restore will undo everything that you have done to change your computer after the date when the restore point is made. So, the computer might well incur data loss.
Note: You will not be capable of performing a system restore if the computer has yet to enable system restore or create a restore point.

Step 1: Press Win + Q, type Create a restore point and then open it.

Step 2: Click on System Restore and then click on Next.

Step 3: Choose a restore point made before the first occurrence of the error.

Use a System Restore Point

Step 4: Click on Next to revert to the selected point.

Bonus Note: How to enable System Restore:
Step 1: Press Win + Q, type Create a restore point and then open it.
Step 2: Ensure that the state of the protection for your system drive is On.
Step 3: If the state is off, select the disk and click on Configure.
Step 4: In the new window, select Turn on system protection and click OK.
Bonus Note: How to create a system restore point
Step 1Press Win + Q, type Create a restore point and then open it.
Step 2: Click the Create button.
Step 3: Name the restore point.
Step 4: After the creation is over, click System Restore.
Step 5: Select Choose a different restore point and then click Next.
Step 6: The restore point you just made will be available in the window.

Method 5: Revert to an Earlier Build

This method only works for users who run into the problem after performing a Windows update. If you recently installed updates on your system, those updates might well be the reason behind this issue. In this case, you can try reverting to an earlier build to solve the issue. Users usually have an option reserved for them to revert to an earlier build. But that option only lasts for 10 days after you have updated the Windows. Refer to the following steps to learn how to Revert to an earlier build.

Step 1: Press the Windows key + I to open Settings.

Step 2: Choose Update & Security.

Step 3: Select Recovery from the left pane.

Revert to an Earlier Build

Step 4: Click Get Started under the Go back to an earlier build title.

Restore Lost Data Using Bitwar Data Recovery

Since the critical process died error is likely to cause data loss, another tricky problem. To fix it, we would like to recommend you to use Bitwar Data Recovery, our reliable and effective recovery tool. With the help of it, you can recover lost files effortlessly, as the following steps show:

Step 1: Download Bitwar Data Recovery from our official website.

Step 2: Open the recovery software, select the drive from which you want to recover data, and then press the Next button to proceed.

main interface

Step 3: Choose the scan mode. We recommend Quick Scan, which is capable of recovering most files. If it doesn’t serve you well, you could try Deep Scan next time.

scan mode

Step 4: Now select the file types you want and then press the Next button.

file types

Step 5Preview all the selected files.

preview

Step 6: After selecting and previewing the files you want, click on the Recover button to begin the recovery process.

Conclusion

In this article, we explain how to cope with the critical process died error, which usually occurs in several common scenarios. Together with solutions to this issue, we have also mentioned another thorny problem, data loss, that might be triggered by the issue. Hence if you are faced with a data loss problem, you could use BItwar Data Recovery, the reliable and user-friendly tool, to retrieve valuable lost files.

How useful was this post?

Click on a star to rate it!

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.

Previous Article

7 Methods for Fixing the 0x0000017 Error Summary: Critical process died is an error that pops up with a Blue Screen of Death also known as BSOD....

Next Article

[Solved] Blue Screen of Error 0x000000f4 Summary: Critical process died is an error that pops up with a Blue Screen of Death also known as BSOD....

About Bitwar Data Recovery

3 Steps to get back 500+ kinds of deleted, formatted or lost documents, photos, videos, audios, archive files from various data loss scenarios.

Learn More

Hot Articles

    Related Articles